Although it may seem like a silly question, there is actually a method to the madness of filling holes as a decorator.
Filling holes is an important part of patching up walls before painting or hanging wallpaper and there are a few different ways to go about it.
The benefits of filling holes are that it provides a smooth surface for painting or wallpapering, as well as holds the nail or screw in place better than if the hole was left unfilled.
However, there can be some challenges when filling holes, such as making sure the fill does not crack and that the hole is completely filled.
Why do decorators fill holes?
Why do decorators fill holes?
Why do decorators fill holes?
There are a few reasons why decorators fill holes.
First, it creates a smooth surface for painting or wallpaper.
Second, it helps to prevent moisture and pests from entering the home. Finally, it can give the home a more polished look.
How do decorators fill holes?
If you're a decorator, chances are you've had to fill holes in walls from time to time. Whether it's from nails, screws, or other hardware, filling holes is a necessary part of the job. But how do you do it so that the hole is filled properly and looks good?
Here are a few tips on how to fill holes as a decorator:
Use the right type of filler. There are many different types of fillers on the market, so make sure you choose one that is suitable for the type of hole you're filling.
For example, if you're filling a small hole, you may want to use a ready mixed filler. For larger holes, joint compound is a far better option.
Preparation of the area around the hole is essential. Before you start filling the hole, take some time to prep the area around it. This includes sanding down any rough edges and cleaning up any dust or debris.
Apply the filler. Once you've prepped the area, it's time to apply the filler. If you're using ready mixed filler, apply it with a filling knife and smooth it out as best you can. For joint compound, use a trowel to apply it evenly into the hole.
Let it dry. Once you've applied the filler, let it dry completely before moving on to the next step. This usually takes about 24 hours.
Sand and paint. Once the filler is dry, sand it down so that it's flush with the surrounding wall surface. Then, paint over it so that it blends in with the rest of the wall.
Thank you for spending the time to read our Blog, if you are considering a decorating / paint spraying project and you’d like some help or advice please feel free to get in touch. Call Trevor on 07532 778861 or email trevor@tjdecor.co.uk - TJ Painting and Decorating, Alton / Petersfield Hampshire